Maxwell's Hardware
SET HOS MNFLD PRESS HIGH 1/4 IN 60 IN L
Part Number:
CCLS60
Brand:
JB Industries
JB Industries Kobra CCLS-60 3-Piece High Pressure Manifold Hose Set With Secure Seal Fitting, 1/4 in, 60 in L, 800 psi, Kevlar, Domestic
JB Industries Kobra High Pressure Manifold Hose Set, 3-Piece, Series: CLS, 1/4 in Nominal, 60 in Length, 800 psi Working, Kevlar, Red/Blue/Yellow, Domestic
- Gasket feature a hood with a straight edges that snaps into the straight edges of the barb and straight edges to straight edges force eliminate gasket blowouts
- Depressor is barbed and locks into the gasket, meaning the outward force on the depressor pushes the gasket further into place, resulting in no blowouts
- Kobra high pressure hoses are made from Kevlar, the same material that stops bullets in bullet-proof vests
- Kevlar makes our hoses incredibly strong and flexible, Kobra hoses feature a nitrile cover which is better than neoprene because it is more resistant to oils, giving the hoses a longer life
- 800 psi working, 4000 psi burst pressure
- 5 to 1 safety factory (beat industry standard of 4 to 1)
- Use rebuild kit 33112RK, P90022 replacement O-ring
- Stainless steel thrust washer insures free rotation even under high pressure
- Three points contacts on depressor
- JB also uses a common crimp that grips the full circumference of the hoses yielding a maximum hold and uniform seals that prevents leaks and burst
- Suitable for R-410A refrigerants
- Low loss fitting adapter available
Standards/Approvals: UL Listed